contact@dakshglobal.com
 
 
Home     |     About us     |     Sitemap     |     Contact Us
 
 FIRE ALARM- Daksh, Teletek   /   HYBRID- SAFACP, Addcon   /   CONVENTIONAL- D-Series, Vision, Nebula, Detectors, Accessories   /   OTHER SYSTEM & SENSOR- Beam Detector, Aspiration System, LHS Cable  
 
   
     Fire Alarm  
     NCS System  
     PA System  
 
   
     About Us  
     Our Team  
     Manufacturing Unit  
     Career  
     Quality  
     Enquiry  
     Contact Us  
 
Fire Alarm System (Conventional)
 Back
• Addressable • Hybrid • Conventional • Sensor & Devices
Eco Series Product Vision Fire Alarm Control Panel Nebula Fire Alarm Control Panel
Detectors Accessories  
This is a purely conventional Panel in which we can detect fire and fault events via logic gates and the events will be displayed on main console via LED indication. In case of detection of fire in any zone the panel will glow the respective LED and will initiate the hooting alarm indication to alert the people about the event.
Features
Expandable up to 12 fully monitored zones with up to 240 detectors.
Hooter output per zone including common hooter output for any zone.
Short Circuit/Overload protection feature to protect the circuit.
Zone isolate feature to identify the disabled zone.
1 “Fire”, “Fault” voltage free relay output.
Inbuilt Battery charger circuit.
Indication of open, short, fire via LED.
Repeater compatibility for remote annunciation.
 
Technical Specification
Mains voltage 220~230V AC
Frequency 50~60 Hz
Operating Voltage 24V DC
Quiescent current 250 mA
Current consumption for ext. devices 3A max.
LED Indication Present
Operational temperature range -10 / +60°С
Relative humidity resistance (93 ± 3) % at 40°С
Housing CRC Sheet
Color Metallic White
Dimensions 580x845x162
Weight approx. 17000g
Zoom Picture
 
Zoom Picture
Product documents:
test20
Expander Unit
This unit is used to expand the number of zones as required by the end user.
Features
Comes with 1,2,3,4 zone expander card.
Zone fire and hooter indication for each zone.
 
Technical Specification
Operating Voltage 24V DC
Quiescent current 50 mA
Current consumption for ext. devices 200mA max.
LED Indication Present
Operational temperature range -10 / +60°С
Relative humidity resistance (93 ± 3) % at 40°С
 
Repeater Unit
This unit is used to repeat the signal of main fire alarm control panel for remote annunciation.
Features
LED indication of each zone.
Repeater acknowledges facility.
Works on 24V DC which comes from main panel.
« Back to <<Conventional Fire Alarm>>
 
 
Home   |   About Us   |    Fire Alarm    |   NCS System    |   PA System    |   Career   |   Enquiry   |   Team   |   Quality   |   Login   |   Registration   |   Manufacturing   |   Contact Us
© Daksh Global. All Rights Reserved.