| |
Hooter
The
ASE series of wall mounting conventional sounders have
been engineered combining rugged construction and acoustic
efficiency. This results in a low current sounder with
high volume, wide-angle sound distribution providing good
audibility in all directions. These sounders are suitable
for many applications from office to hotels, industrial
plants to hospital. |
|
|
Manual
Call Point
The
ASE series manual call points have been developed to provide
a manual alarm interface to conventional fire alarm systems.
High quality switching components and material's combine
to provide excellent reliability and safety.
|
|
|
Response
Indicator
This is the
indicating device which is used for the purpose of visual
check out the response of the Detectors which are not
directly visual like for the false floor or for the false
ceiling, False roof etc. This Device is directly linked
with the Detector. This one device may be connected with
the more than one Detector.
|
|
|
Exit
Light
It
is used where the requirement of indication given to the
general public about the Exits, stairs (up or down), Fire
Exit as in parking place, in shopping complex, official
complex Business Complex etc. It is basically indication
to the public. Its designs are as per the customer requirement
and base colour is also as per customer requirement. Basically
its Display paper colours are Red, Maroon, Green, Parrot
green etc.
|
|
|
Glow
Sign Board
It
is a modern and novel entrant in the field of illumination
of Emergency EXIT Signs that mark the life saving EXIT /
WAYFINDING paths for Emergency Evacuation, General Safety
and Caution Warning in public buildings, hospitals, factories,
auditoriums, theatres, hotels, subways, motels, banks, garages,
offices, schools, restaurants, ships, aircrafts, warehouse,
powerplants, etc. in the event of power failure, more so
when there is a calamitious fire-outbreak.
|
|
|
ZMU
\Zone Monitoring Unit
It
is a peripheral device, which should be terminated with
the Main Semi addressable fire alarm control panel. All
the zones should be terminated to the SFACP through individual
zones. The FACP shall be able to obtain analogous for all
zones in the controller through a pulsed digitized current
data.
|
|
|
Control
Module Unit
Control module means
potential free contacts or tripping of AHUs, Power Supply,
for hooting purpose etc. One module operates 8 relay outputs
powered from the controller.
|
|
|
|
|
|
